What Are The Common Malfunctions Of Garage Doors

0
445
garage door spring replacement service

The gate goes through about 1,500 closing and opening cycles per year and is designed to last about 10,000 cycles. That’s a lot of heavy lifting, performed over and over again. No wonder, garage door problems are a common cause of irritation for most homeowners. Even reliable garage doors can require expensive repairs that cannot be solved by simply pressing a few buttons. There may be a need for professional garage door services such as spring replacement etc. Read on to know more about the common malfunctions that can occur. 

Garage Door Noise

When your garage door starts making noises, it is a symptom of a larger problem. Squeaking noises might indicate that the rollers need to be lubricated or are worn out. Use a silicone-based lubricant to service them or call a professional to have the rollers changed.

A rattling sound might mean that something is loose. Tighten all of the hardware, including the nuts, bolts, and screws, to check whether the problem is resolved. A torsion spring problem might result in a popping sound. If they lose lubrication or become loose, they may generate a popping sound when the garage door opens or closes. Replacing torsion springs is a dangerous process that can be harmful to your health and should only be performed by garage door spring replacement service.

The Opener Switch Isn’t Working

If you click the opener button and your door does not move, it might be due to a number of factors. The first option is that the door is simply blocked. 

Another option is that the motor was turned off. Examine the motor, which is generally connected to a ceiling light. Simply reconnecting it should resolve the issue.

More advanced circumstances include photo-eye sensor damage or circuit breaker tripping. These are two common problems that might cause the opener switch to malfunction. Check that nothing has clouded or obstructed the photo-eye sensor. Check to see whether a fuse has blown as well. You’re unlikely to be able to turn on the garage lights in this situation. Resetting the circuit breaker may assist in resolving the issue.

The garage door will not open or close.

There might be a number of reasons why your garage door does not respond to whatever signal you provide it. Check the batteries in the remote and keypad first to rule them out as the source of the problem. If the batteries are in good condition, verify the garage door opener gadget to confirm that all lights are switched on and operational. Otherwise, the motor might have been disconnected from the power supply, or a fuse could have burst.

To begin ruling out the root of the problem, examine these areas one at a time. If none of these solutions work, seek professional aid in diagnosing the problem.

The keypad is inoperable

Some garage doors may not have a keypad to open them. However, if yours fails, they may also fail. Before proceeding, check to see if the batteries are dead. Replace the batteries and try again to enter your keypad number to see if it solves the problem.

Your keypad may need to be reprogrammed on occasion. Check your manual for instructions on how to do this on your unique keypad. If you don’t have the original manual, look for the model on the internet.

If none of these works, it is probable that the antenna, rather than the keypad, is faulty. The keypad signal is picked up by the motor’s antenna. Make sure it’s pointing straight down. If you still can’t get the keypad to work, you should call a professional to assist you fix the problem.

Uneven Garage Door Opening

In rare cases, the door will start to open or close, but then stop working halfway through. Whether it entirely opens and closes or not, it may signal that the boundaries have been crossed. The limits are set to alert the door when it should stop closing or opening so that the motor does not continue to run. For information on how to change the limits by turning a screw in the motor, consult your owner’s manual.

It might even be as simple as inspecting the rails for obstructions. On the rails and rollers, rust and corrosion might occur. Wipe off the rails to ensure no debris is impeding them. If this doesn’t work, it’s conceivable that the spring system is broken. In this case, a technician can help you resolve the issue or replace the springs.

The garage door opens and closes too slowly

Your garage door may open and close properly on occasion, but at a glacial pace. This is typically caused by worn-out rollers or dirty tracks. Garages in arid places or during the winter tend to dry up faster or freeze, making it more difficult to slide the garage door down or up the tracks. This may be avoided by regularly cleaning the tracks and lubricating the rollers.

The motor runs even when the door is not moved

When you press the open button, the motor may start, but the door may not move. The constraints in this case are incorrect. When this happens, the door moves, but the motor continues to run after the door has stopped moving. This can occur whether the door is open or closed, so keep an ear out for engine noises. In any situation, adjust the restrictions to tell the motor when to stop working.

If the garage door does not move, it may have detached from the belt. To rejoin the belt, you’ll need to follow specific instructions depending on your installation system. This is common when someone unintentionally pulls the emergency release cord.

Tips for Basic Maintenance

Many garage door problems may be avoided with regular maintenance. The specific remedies you take to solve the problems might assist prevent them from occurring in the first place:

  • Brush and lubricate the rollers and tracks at least once a season to reduce wear and tear and dirt accumulation.
  • Tighten the hardware to avoid sounds and other issues from occurring.
  • Check the springs and pulleys to ensure they are in good working order. Professionals should change them on a regular basis.
  • If none of these methods solve your garage door difficulties, or if you’d like to delegate the task, consider hiring a door installer and repair professional to look after your garage door.

In case none of that helps, consider STI Garage Door as your trusted partner to help you to carry out all the necessary steps in order to remove the malfunctions of your garage door. Whether it is a garage door spring replacement or other services, we are there for you!

LEAVE A REPLY

Please enter your comment!
Please enter your name here