Cost To Finish Drywall Project – How To Estimate?

Cost To Finish Drywall

Estimating a budget for a renovation or construction project is a daunting task. The best option available to you is to have a contractor estimate the Cost of your interior carpentry work. However, estimating the Cost to finish drywall work can help you accept or reject the contractor’s price.

For any construction or renovation project, you will have to install drywall. The latter offers significant comfort both in terms of sound insulation and thermal insulation. There are several types of drywall for your home. Whose specificities are different and which will respond more or less well to your development project. Here are the different possibilities available to you to calculate the best price for drywall.

Cost to finish drywall project

Most contractors estimate their rate based on the size of the room. Their first criterion is the number of drywall need for the entire project. Entrepreneurs have different estimation methods. The most accurate way to determine the number of drywall is to measure the height and width of each wall and ceiling. That is to determine the square footage to cover the area.

To determine the square footage of each wall, multiply the width by the height of each wall. It is important not to subtract doors and windows from your calculation. Because although these are not covered. Contractors include them in theirs. Then add up all wall and ceiling area measurements to determine the total area of ​​the space. That to install the drywall. After you convert this area to square feet, divide it by 32 square feet. As a piece of drywall is 4 x 8 inches. And you get the number of drywall you need.

As for the price of drywall, the amount varies depending on the material. The dimensions of the partition and the type of installation. There are two types of drywall: honeycomb panels and plasterboard. Overall, it takes 1 to 2.5dollars per square for honeycomb panels. And 35 to 45dollars per m² for plasterboard.

Take a margin on your final calculation to factor in the Cost of various other accessories. Boxes of drywall screws, drywall buckets, rolls of drywall stitching tape, etc.

Cost of installing and finishing drywall project

Small jobs can refer to installing drywall in a kitchen or bathroom. Most contractors set their rate based on the Cost of materials to need for the job. And the number of days it takes to complete the project. Of course, this is a very objective estimate depending on the previous experience of the entrepreneur. It will help if you keep in mind that each artisan on the job site will expect to earn between 236 and 354dollars per day. Less skilled artisans will expect 15 or 20dollars per hour.

Price of a drywall per material

The price of drywall directly depends on the types of materials you want to use. Similarly, the choice of materials depends on the use.

For example, if the latter intends to support a buffet of several tens of kilos. It cannot be made of glass and the Japanese partition type. We generally distinguish between fixed partitions and removable partitions because they do not have absolutely the same properties.

Price of a drywall

The star of partitions is drywall, more precisely BA 13. So-called dry partitions have the advantage of being installed without recourse to mortar. So, drywall is perfect for that. In addition, the price of drywall is less than others.

Its principle is simple. BA 13 plasterboards fixed to a metal framework with a generally standard thickness. Sufficient to insert the insulation and the electrical or plumbing sheathing. You can also install this framework on the ceiling to create a false ceiling.

However, BA 13 is sensitive to humidity. It is imperative to use a water-repellent (H quality), generally green or blue, in damp rooms.

The price of a plasterboard partition generally amounts to $35 / m² to $45 / m², BA 13 and metal frame included.

Price of a wooden partition

If you prefer, you can use a wood partition. The latter has very good technical capabilities. But it requires more complex work than place partitions. However, they provide the interior of your home with a charm and warmth that plasterboards can never match.

The wooden partitions are also based on a frame. Generally, wood is made up of rafters. This framework can line with insulation and cover with the first layer of panels, whether plywood or chipboard. This precaution makes it possible to reinforce the partition and to give it better rigidity. This system can also place on the ceiling and act as a false ceiling.

Wooden partitions have prices ranging from $35 / m² to $70 / m².

Price of an aerated concrete partition

Aerated concrete is increasingly popular with specialists in interior work and construction. Indeed, this material offers very great technical capacities associated with great ease of work.

Aerated concrete is a naturally well-insulated material. In most cases, it does not require any additional insulation. Whether in the wall or the partition. It is also very light and allows installing partitions in rooms with reduced bearing capacity while facilitating the work.

Finally, cellular concrete can coat any product as long as you cover it with a suitable pore filler treatment. This treatment is essential if your project involves painting. That is most often the case for adding a partition inside a house.

The price of cellular concrete is higher than that of more traditional solutions. Generally, it requires a gross investment of between $45/ m² and $65/ m², depending on the thickness.

Price of glass bricks

Glass brick is ideal for creating an opaque partition. It was allowing light to pass through without providing a direct view. Therefore, we can partition space and offer it natural light if it is blind without a direct and complete view.

Ideally, glass brick uses in the bathroom. The glass bricks can create a full partition wall in this room, such as separating a master bedroom from a bathroom. Above all, we can create a bespoke and very aesthetic shower cubicle using only glass bricks.

It generally estimates that a classic glass brick price ranges from $8 to $15.

Price of a glass partition

Unlike glass bricks, the glass partition generally provides a direct and uninterrupted view. It is most often a metal frame that inserts a single or double glazing. This type of partition is very often found in industrial-type apartments.

However, different types of glazing can be used. Which can be completely transparent, or on the contrary, blackout, hammered or even reinforced. The price of a glass partition ranges from $1000 to $1,500.

Price of a removable partition

Suppose you want to divide a room without adding a final wall or a hard partition. You can go for a removable partition. The latter has two main advantages. First, you can have a partition or not, as you wish. Modulate your space and thus better enjoy your home.

On the other hand, a removable partition significantly reduces work. Indeed, it will no longer be a question of construction work but of simple development work.

Removable partitions are generally made like large glass doors that slide to free up space. This system is often used to separate a living room from a dining room while maintaining a single space. That you can use for the occasion of more massive reception.

The installation of a partition : Cost to finish drywall

Then, any partition must be perfectly upright and have a particularly flat surface. Any defect in flatness will be excruciatingly visible after painting. So you have to apply it well. In installing drywall, you will quickly realize that obtaining invisible place joints is a specialty. That requires a lot of experience.

Finally, you must consider carefully any partition of drywall. Indeed, it would help if you planned everything, the door system, the frame. But also any passage of cable or plumbing.

Find a professional for your drywall installation.

Calling in a professional is generally essential. Indeed, professionals have the appropriate tools that greatly facilitate the progress of the work. For example, in a plasterboard partition, professionals have plasterboard lifters that save hours of work. In addition, the professionals will offer you an impeccable rendering for your partition and avoid any defect in flatness.

To find the professional best suited to your needs, ask for several quotes. You will thus have a very good general estimate of the price of a partition, which will allow you to find the best quality/price ratio.

FAQ on Cost to finish drywall

1. How much do you charge to put on drywall?

It charges $120.00 on one side and $220.00 for two sides. The price varies according to the work conditions. The volume of drywall to be installed, height.If it is a straight or curved installation. Or if it is a two-sided wall or drywall, among others.

2. How Much Does It Cost to Build a Drywall House?

The material costs will be around 1400 soles and the labor 800. Thus, depending on the style of the texture and other characteristics. This project will probably cost up to 3000 soles.

3. How much to charge for laying drywall?

The approximate Cost can range from $2,000.00 to $27,000.00, always depending on the dimensions, characteristics and design. That desire, as well as the type of drywall to use. Also, the quality of the materials, the estimated time in the duration of the work, etc.

4. What are false ceilings?

Ceilings are false ceilings placed under the roof of a building for various functions. Generating acoustic insulation, thermal insulation, hiding electrical and hydraulic installations. Also, fire, surveillance and security systems, equipment, internet, wiring and various pipelines, etc.

Conclusion on Cost to finish drywall

Professionals are generally recommended for installing drywall projects. They can quickly implement a project and with very technical security, which is always appreciable if the partition is used in a wet room or the kitchen.

The price of installing drywall depends greatly on the surface to be produced. And the type of material that it will work. Usually, drywall is the cheapest and aerated concrete is the most expensive.

Benedict is an entertainment enthusiast and a passionate blogger. He loves to share his insights and opinions of the ever-evolving entertainment world. When he's not writing, you can find Benedict immersing himself in the latest releases, following the latest industry events, and engaging with fellow entertainment enthusiasts online.


Please enter your comment!
Please enter your name here